Headsets Australia
Ready to buy? Visit
Please Note: The model number of your Interquartz telephone can usually be found on a label stuck on the bottom of the phone.
All these Interquartz phones have a dedicated headset jack. To adjust the transmit level you must use the control on the underside of the telephone. There is also a headset polarity switch on the underside of the phone.
Interquartz attaches the following information to these telephones:
"For best results turn the 'HEADSET MIC ADJUST' control to adjust the volume of your voice when speaking on the headset so that it is loud enough (call someone and ask them to tell you how loud you sound). ADJUST SO THAT YOUR VOICE IS JUST LOUD ENOUGH AND NO MORE. Do not adjust according to how well you can hear your own voice; rely on the feedback from your assistant. Your voice (to the other party) should be no louder than when you speak on the handset. IF YOU INADVERTENTLY SET THE 'HEADSET MIC ADJUST' CONTROL SO THAT YOUR HEADSET MIC IS TOO LOUD YOU MAY EXPERIENCE PROBLEMS HEARING THE OTHER PARTY BECAUSE YOUR HEADSET WILL PICK UP TOO MUCH BACKGROUND NOISE. If you encounter this difficulty please turn the 'HEADSET MIC ADJUST' control anti-clockwise a little at a time to get the best balance between the loudness of your voice and the elimination of problems hearing the other party."
Plantronics:
Any H or P series headset and a Polaris cable. Polarity switch position P - transmit level fully anti-clockwise. These will also accept a Vista cable if the Polarity switch position is set to V - transmit level fully clockwise.
Jabra:
Any "direct connect" headset and a standard cord. Polarity switch position P - transmit level fully clockwise.
ADD-COM:
Any headset and a BLUE cord. Polarity switch position P - transmit level fully clockwise.
These phones have a dedicated headset jack. They have a headset polarity switch on the underside of the phone to allow for different manufacturers wiring. They do NOT have any transmit level adjustment.
Plantronics:
Any H series headset and a Polaris cable. Polarity switch position "normal". These will also accept a Vista cable if the Polarity switch position set to "reversed".
Jabra:
Any "direct connect" headset and a standard cord. Polarity switch position "normal".
ADD-COM:
Any headset and a MPS switch. Polarity switch position "normal".
All these phones have a dedicated headset jack. To adjust the transmit level you must use the control on the underside of the telephone. There is also a headset polarity switch on the underside of the phone.
Plantronics:
Any H or P series headset and a Polaris cable. Polarity switch position P - transmit level fully anti-clockwise. These will also accept a Vista cable if the Polarity switch position set to V - transmit level fully clockwise.
Jabra:
Any "direct connect" headset and a standard cord. Polarity switch position P - transmit level fully clockwise.
ADD-COM:
Any headset and a BLUE cord. Polarity switch position P - transmit level fully clockwise.
To fit a headset to these phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.
Plantronics:
Any H series headset and a M12 amplifier.
Jabra:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.
ADD-COM:
Any headset and a MPS Switch.
To fit a headset to these Interquartz phones, unplug the handset and replace it with the appropriate amplifier. The handset cord then plugs into the amplifier.
Plantronics:
Any H series headset and an M12 amplifier (Switch position 5, Transmit 2).
Jabra:
Any headset and a GN 8000 amplifier or GN 8210 digital amplifier.
ADD-COM:
Any headset and a Voyager amplifier.